Duribond Hot Melt Glue Gun 40w and Glue Gun Sticks

The Duribond Glue Gun is a precision made product for dispensing hot melt glue. Features a non-leaking nozzle to assist with accuracy in use and reduce mess. Great for bonding plastics; ceramics; paper; card wood and metals when used with appropriate glue sticks. Suitable for use with 11-11.5mm hot melt glue sticks.quick warm-up timepowerful 40w heaterquality constructioneasy operationnon-leaking nozzlesuitable for a range of surfacessuitable for 11-11.5mm hot melt glue sticksmeets current regulations – TUV & GS Certificates. CEInstructions:1. Plug-in gun to 240v mains socket. Load with a suitable 11mm diameter hot melt glue stick through the rear tunnel of the gun2. Allow the gun to fully warm-up before use (5mins approx.)3. Once heated squeeze trigger carefully to feed the glue stick through the gun barrel. Release trigger to stop flow4. Press surfaces together within 15 seconds of application. Clean surfaces work best5. If the gun is to be rested for a time or if application is complete then turn off power for safetyCAUTION: Hot melt glue guns get very hot in use with the nozzle area reaching temperatures up to 380 degrees.If accidental contact should occur do not try to remove glue – place affected area in cold water IMMEDIATELYThis product is intended for ADULT USE. If used with minors it should be done so under strict adult supervisionDuribond Glue Gun Sticks (11mmx 300mm) are suitable for all hot melt glue guns which accept 11mm sticks. These long 300mm sticks offer excellent adhesive properties being suitable for a wide range of materials. Great for bonding plastics; ceramics; paper; card wood and metals when used with appropriate glue sticks. As with all projects test first on waste material to make sure that this method of fixing matches your requirements.long 300mm sticks offering excellent valuesuitable for a range of materialsfit most 11mm hot melt glue gunsexcellent sticking qualities